Our Products
ProMount Bodies
I can supply your raceway with almost any body style available. These bodies are painted and winged and unlike most other available bodies, they are virtually ready to race. Your customer needs only to mount it and reinforce the rear pinhole. My bodies are cut, completely taped and reinforced to meet the extreme demands of today’s wing car racing. The only thing I can’t do, for obvious reasons, is to put in the “Ninja Stars”. All bodies are cut to meet the needs of your racers and race track. It is helpful if you give me the guide center to axle center length of your chassis for cobalt cars.
Winged Flexi Bodies
For these bodies, I used the exact same philosophy I used to develop the ProMounts. They have the same type of cut, except a bit longer and higher and a bit different reinforcing to meet the needs of this type of car. They are available in either a high or low downforce style.
Sportsman Series
These bodies are cut higher and longer than our Promounts and are designed for the hobbiest and will not fit on a flexi chassis. They are not intended for the racer. They are comparable in quality to our very popular “winged flexi” product. They will fit all current “C” can chassis.
Rental Car Bodies
Wing cars.
These bodies have a simple stripe in a complimentary color and your raceways name on the back deck. These bodies are stapled and have a fully wrapped front end making these bodies the longest lasting and most durable rental car bodies you have ever used. Available in either high or low downforce styles and .007 or .010 thickness. Bodies are winged using Slick 7 7X7 air control kits
Stock cars
These bodies are painted a single color with your name on the front hood.
* Minimum order is 2 sets. Each set is one body in each of the eight colors
Painted bodies
I can ship you almost any painted, unwinged body. This includes most wing car bodies and a limited range of GT-1, GT-12 and 4” stock car bodies.
Custom Designs
Custom masks are subject to my acceptance. Please e-mail them to me as Corel “CMX” files. I can add your customers name to almost any mask I have. I do not store any of the files you send me so that I do not accidentally use your mask for another customer. I will change the number on any mask I have at no charge. If one of your racers wants to have an existing mask painted with a particular color combination, you just have to let me know.
Painted (NON-Winged) Wing Car Bodies
I can supply any of my winged bodies, at a discount, without wings. This includes bodies with your custom design.
Controller Handles
I am currently painting Parma and Redfox/Kelly controller handles. Please check our photo gallery for more examples.
Race Cars
I am now building racecars. These cars are not mass produced on an assembly line, but are individually hand crafted by me with the same care I give my own cars. These cars are “ready to race” not just “ready to run”. I use Slick 7 and Koford chassis exclusively. You only need to put in your motor and add tires.
Cars *
|
RTR’s
|
Notes
|
|
G-12 |
|
“C-can” motors by Port Jefferson Raceway. Add $15.00 for bottom weights. Added by HSP |
|
Cobalt |
|
|
To many choices to list. Call for pricing.includes gear guard |
GT-12
|
|
|
Same as G-12
|
*
No motor or
tires
Body Cutting Tools
Are your racers having trouble cutting their bodies flat and straight and to the correct heights? Do you find that many of your racers run the front of their bodies to low? Our new Body Cutting Tool guarantees a perfect and consistent cut with the proper amount of ride height in the nose to prevent the front end of the body from dragging on the track. Slick 7 cuts these tools for me on the same EDM equipment that they use to cut their chassis. These tools are available in 3 sizes.
Part |
Decimal |
Fraction |
Metric |
BCT-1 |
1.062 |
1 1/16 |
27mm |
BCT-2 |
1.149 |
1 5/32 |
29mm |
BCT-3 |
1.280 |
1 9/32 |
32.5mm |
Product ID |
Width |
Mfg ID |
Dealer Price |
Racer Net |
Tensile Strength |
T11 |
1/4 INCH |
3M-898 |
380 lbs |
||
T12 |
1/2 INCH |
3M-898 |
380 lbs |
||
T14 |
1 INCH |
3M-898 |
380 lbs |
||
T2 |
1/2 INCH |
HSP T2 |
410 lbs |
||
T4 |
1 INCH |
HSP T4 |
410 lbs |
T12 & T14 will be discontinued when current stock is gone.
Product ID |
Width |
Mfg ID |
T21 |
1/4 |
3M-9500 |
T22 |
1/2 |
3M-9500 |
T23 |
3/4 |
3M-9500 |
Solder
Product ID |
Length |
S1 |
2 Feet |
Shipping Best way, add freight and COD. I will call to let you know it’s on the way and how much to make the check for.Cars and bodies might not be shipped in the same box for obvious reasons.